UV-DTF Santa Snack Board

UV-DTF Santa Snack Board Decals.

Leave a special treat for Santa and his friends this year with our adorable Santa Snack Plates. Available in 6 different designs. This product includes the white acrylic plate and a UV-DTF decal to apply. There is also room to personalise with your children's names. 

Rectangle designs will come with a 220mm x 160mm white acrylic rectangle with rounded edges.

Acrylic boards and UV-DTF come separately and will need to be applied.

Acrylic is cut to order and can have up to 48 hour turnaround. Please call the store if you require your item urgently.

Application Instructions 
Prepare application surface ahead of time to ensure no oils or debris are present. 
Place decal on a firm surface, rub with felt tipped scraper  to ensure pre applied transfer film  is well adhered.
Turn decal over and remove backing film.
Position and apply decal to desired surface  (Decal cannot be removed/repositioned after application).
Use felt tipped scraper to ensure air bubbles are removed decal has firmly adherded to surface.
Slowly remove clear transfer film.

* once decal has adhered to the surface you won’t be able to peel off and re-apply. Please be careful while positioning * 

What is UV DTF?             UV (ultraviolet)   DTF (direct to film)

UV DTF is a printing method that uses UV curable ink.

This ink is printed onto an adhesive film enabling the ability to create a “peel and stick” decal without the need for the use of craft vinyls.

Once the ink has been printed and then UV cured the completed print is then laminated with a transparent film, this film acts as a transfer for the decal.

Care  Instructions Allow decal to cure for 24-48 hours Decal is not microwave/dishwasher safe Do not soak Pre-measure before applying decal. We are not responsible for incorrect application errors.