HTV Glitter

Imagine Glitter Heat Transfer Vinyl (HTV)

Can Be Used On:

100% Cotton | 100% Polyester | Cotton/Polyester Blends | Leather | Wood | Nylon | Spande
Plus many other fabrics and surfaces that can withstand 150°C heat.

Product Notes:

Continuous Rolls: Orders of 1m or more will be supplied as continuous rolls where possible.

Sheets: 30 × 50 cm lengths will be provided as individual sheets.

How to Use HTV

Prepare Your Design:

Mirror/reverse your image in your design program (e.g., Computer, Laptop, or iPad).

Load the HTV:
Place the HTV into your cutter with the shiny/coloured side facing down.

Cut and Weed:

Cut the design, then weed out excess HTV to leave only the desired design.

Position and Press:

Align your design on the garment or surface.

Follow the heating instructions specific to your HTV type (see below).

Pressing Instructions:

Heat at 150°C for 15 seconds.

Warm peel: Allow the material to cool slightly before peeling off the carrier sheet.

Aftercare:

Wash the garment 24 hours after application.

Use Glitter HTV as a final layer when layering designs.

Recommended Equipment

Heat Press: For the best results, use a heat press. Iron or "easy press" may not provide consistent heat and pressure.

Cut Settings (Guide Only)

Silhouette Cameo:

Blade: 3

Force: 14

Speed: 25 (10 for earlier models)

Cricut Air: Standard glitter iron-on settings. Adjust as needed.

Cricut Maker:

Setting: Glitter Iron-On

Pressure: More Pressure

Note: Cut settings may vary between machines, even for the same model. Use these as a starting point and adjust as necessary.

Care Instructions

First Wash: Wait 24 hours after application before washing.

Washing: Avoid hot washes; use cold or warm water and mild detergents.

Dry Cleaning: Do not dry clean.