Printing UV DTF Express Only Orders Until Thursday 10th. ++ALL ACRYLIC ORDERS WILL BE HELD UNTIL 11TH APRIL (APROX) DUE TO LASER MACHINE AWAITING REPLACEMENT PARTS++
Application Instructions Prepare application surface ahead of time to ensure no oils or debris are present. Place decal on a firm surface, rub with felt tipped scraper to ensure pre applied transfer film is well adhered. Turn decal over and remove backing film. Position and apply decal to desired surface (Decal cannot be removed/repositioned after application). Use felt tipped scraper to ensure air bubbles are removed decal has firmly adherded to surface. Slowly remove clear transfer film. * once decal has adhered to the surface you won’t be able to peel off and re-apply. Please be careful while positioning *
What is UV DTF? UV (ultraviolet) DTF (direct to film) \n
UV DTF is a printing method that uses UV curable ink.
This ink is printed onto an adhesive film enabling the ability to create a “peel and stick” decal without the need for the use of craft vinyls.
Once the ink has been printed and then UV cured the completed print is then laminated with a transparent film, this film acts as a transfer for the decal.
Care Instructions Allow decal to cure for 24-48 hours Decal is not microwave/dishwasher safe Do not soak Pre-measure before applying decal. We are not responsible for incorrect application errors.
